Turning old HPS fixtures into energy‑efficient LED retrofits can slash energy bills, improve light quality, and reduce maintenance. This article highlights five top Amazon options that convert shoebox, wall packs, and high bay fixtures to modern LEDs. Each product section covers key features, installation notes, and how it stacks up against common HPS lighting challenges. A concise buying guide follows to help you compare compatibility, efficiency, and long‑term value across options.
| Product | Base Type | Wattage Range | Approx. Lumens | Hit Criteria |
|---|---|---|---|---|
| LED Shoebox Corn Retrofit Lamp — 75/95/115W | Rotatable E39 Mogul | 75/95/115W | ~16,100 lm | High output, directional control |
| Light Efficient Design LED-8030M57-A High Bay | EX39 base | — | Not stated | Broad, even distribution |
| BBESTLED 150W Retrofit LED Light Kit | Adjustable mounting, 5000K | 150W | ~21,000 lm | ETL & DLC listed |
| 120W LED Retrofit Kit — High Bay | E39 and E26 bases | 120W | ~16,200 lm | Flexible base options |
| JimWhen 2Pack LED Retrofit Kit — 2×4 FT | Magnetic troffer retrofit | 36W each | — | Easy install, long life |
LED Shoebox Corn Retrofit Lamp, 75W/95W/115W
The LED Shoebox Corn Retrofit Lamp uses a rotatable E39 Mogul base to direct light exactly where it’s needed, reducing wasted lighting and energy. With selectable wattages of 75W, 95W, and 115W, this fixture delivers up to 16,100 lumens at an efficiency of about 140 lm/W. It’s designed for parking lots, wall packs, and flood lighting retrofits, and claims significant energy savings over traditional MH/HPS lamps. A robust aluminum heat sink supports long life. Ballast removal and direct wiring are required for installation.
Key considerations include the directional capability of a 180° rotation, which helps minimize light spill onto unneeded areas. For facilities with existing one‑direction fixtures, this feature can reduce wattage needs while preserving or increasing perceived brightness. The unit’s life expectancy is described as exceeding 50,000 hours, translating to decades of maintenance relief in a typical outdoor setting.
Light Efficient Design LED-8030M57-A High Bay
The LED-8030M57-A High Bay is designed for HID high bay fixtures, offering ballast bypass and a rotatable EX39 base to direct light where needed. It emphasizes broad, even light distribution and claims up to 80% energy savings compared to older HID retrofits. The product promises up to twice the delivered lumens versus generic LED corn lamps, which helps maximize light on critical areas such as loading zones, staging, and perimeters. Installation notes stress ballast bypass and proper mounting for reliable operation.
From a performance perspective, this option targets facilities seeking a straightforward, high‑quality retrofit with enhanced control over light output. The design aims to minimize glare and distribution gaps common with older systems, supporting improved safety and visibility in outdoor environments. Maintenance considerations include the long‑term efficiency gains and reduced ballast-related failures typical of HID replacements.
BBESTLED 150W Retrofit LED Light Kit
The BBESTLED 150W kit is designed specifically for shoebox fixtures, offering a 5000K color temperature and up to 21,000 lumens. It’s built to replace a 600W HID/ MH setup, delivering up to 80% energy savings according to its marketing materials. The kit includes an adjustable U‑bracket for horizontal or vertical mounting, enabling flexible installation in various fixture housings. It’s ETL and DLC certified, which supports reliability and performance standards for outdoor lighting projects.
Pros include strong luminous output and a broad coverage pattern suitable for parking lots and street lighting. A potential drawback is ballast bypass necessity, which requires correct wiring and fixture compatibility. As with other LED retrofits, long‑term maintenance costs are typically reduced due to longer lamp life and lower energy draw, offset by upfront installation effort.
120W LED Retrofit Kit — 16,200LM
This 120W retrofit kit targets a wide range of outdoor fixtures, including high bays, shoeboxes, parking lots, streetlights, wall packs, and flood lights. It delivers up to 16,200 lumens with 135 lm/W efficiency and an 80+ CRI for accurate color rendering. The kit offers both E39 and E26 bases for flexible compatibility and includes an adjustable U‑bracket for easy horizontal or vertical mounting. A typical instruction is to remove or bypass the ballast prior to installation.
With its high lumen output and dual base options, this kit is well suited for facilities transitioning from high‑wattage HID systems while preserving existing fixture form factors. Energy savings are highlighted, along with reduced maintenance costs due to LED longevity. Installation notes emphasize proper ballast removal, which is critical for reliable operation and warranty compliance.
JimWhen 2Pack LED Retrofit Kit — 2×4 FT
The JimWhen 2Pack LED Retrofit Kit is designed for 2×4 ft fluorescent fixtures, converting them to LED with a 36W per kit output and a 5‑step install process. Labeled as UL certified, the kit promises a lifetime of 50,000+ hours and energy savings up to 90% versus traditional fluorescent lighting. The design emphasizes quick installation, with magnetic mounting facilitating a straightforward within-fixture retrofit. The kit supports 0–10V dimming in some configurations, depending on fixture compatibility.
For facilities seeking rapid upgrades to indoor or outdoor troffer lighting, this kit offers a low‑cost, space‑saving option with long‑term energy benefits. Potential considerations include ensuring that dimming capabilities align with existing controls and that the magnetic attachment provides adequate support in exterior environments where weather exposure is a factor.
Buying Guide: Key Considerations For High Pressure Sodium Retrofits
- Fixture compatibility: Confirm base types (E39 Mogul, E26, EX39, etc.) and whether ballast bypass is required. Some kits offer dual bases for flexibility, while others assume a direct‑wire ballast‑free setup.
- Wattage and lumen output: Compare lumens and efficacy (lm/W) to ensure lighting levels meet area requirements. Higher lumens per watt translate to larger energy savings over time.
- Color temperature and CRI: For outdoor applications, 5000K color temperature provides daylight‑like clarity, while a high CRI helps accurate color rendering for security and safety tasks.
- Beam control: Rotatable bases and directional optics reduce light spill and glare. This is especially important for parking lots and perimeters where focused illumination improves safety.
- Certification and warranty: ETL/DLC listings signal safety and performance standards. A long warranty reduces risk for large outdoor installations.
- Installation complexity: Ballast bypass, wiring, and mounting orientation influence labor costs. Some kits offer quick install features like magnetic mounts or adjustable brackets.
- Maintenance and lifetime: LED retrofits typically offer lower maintenance than HID lamps due to longer lifespans. Consider total cost of ownership over 7–15 years.
- Environmental and regulatory factors: Outdoor environments require IP ratings and heat management; ensure the product can withstand temperature fluctuations and weather exposure.
In sum, selecting the best high pressure sodium LED retrofit involves balancing fixture compatibility, light distribution, and long‑term energy savings. The options highlighted here deliver robust lumen output with directional control and broad fixture compatibility, helping facilities modernize without sacrificing safety or performance.